ECS A780LM-M, Manual, Page: 38 / 70

34
Using BIOS
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
Allocate IRQ to PCI VGA (Yes)
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system. You
set this value to No to free up an IRQ.
PCI / PnP Configuration
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
Press <Esc> to return to the main menu setting page.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PCI / PnP Setup
Options
PCI-E
PCI
OnBoard
F10: Save ESC: Exit +/-/: Value Enter : Select
F9: Load Default Settings
F1:General Help
: Move
mnlk
Init Display First PCI
Allocate IRQ to PCI VGA Yes
Help Item
PC Health Status
On motherboards support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
-=- System Hardware Monitor-=-
Smart Fan Function
Press Enter
Shutdown Temperature Disabled
CPU Temperature : 44°C/111 ° F
CPU Fan Speed : 2008 RPM
UCore : 1.320V
VDIMM : 1.786V
Case Open Warning Disabled
Chasis Opened No
Help Item
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
PC Health Status
f
F10: Save ESC: Exit +/-/: Value Enter : Select
F9:Optimized Default F1:General Help
: Move
mnlk