background image

Chapter 2

7

A68F2P-M2 USER MANUAL

Chapter 2

Installing the Motherboard

2-1. Safety Precautions

2-2. Installing the motherboard in a Chassis

This motherboard carries a Micro ATX form factor of 225 x 200 mm. Choose a chassis
that accommodates this form factor. Make sure that the I/O template in the chassis
matches the I/O ports installed on the rear edge of the motherboard. Most system
chassis have mounting brackets installed in the chassis, which corresponds to the
holes in the motherboard. Place the motherboard over the mounting brackets and
secure the motherboard onto the mounting brackets with screws.

Follow these safety precautions when installing the motherboard:

Wear a grounding strap attached to a grounded device to avoid damage

from static electricity.

Discharge static electricity by touching the metal case of a safely grounded

object before working on the motherboard.

Leave components in the static-proof bags.

Always remove the AC power by unplugging the power cord from the power

outlet before installing or removing the motherboard or other hardware
components.

Do not over-tighten the screws as this can stress the motherboard.

Summary of Contents for A68F2P-M2






























































Reviews: