ECS A55F-M2 V.2.0 User Manual Download Page 59

Page: 59 / 74

CrossFire

Technology [AMD Dual Graphics]

Support

Chapter 5

CrossFire

Technology (AMD Dual Graphics) Support

CrossFire

Technology

The CrossFire

technology provides significant display performance boost to AMD-

based systems by inserting the external PCI Express graphics card and enabling
both the discrete GPU and the AMDA75 graphics core to render simultaneously in
Hybrid CrossFire

mode.

Follow the steps below to start the CrossFire

technology.

1. Insert a graphics card (which can be used for CrossFire

technology, such as

HD6670 series) into the

PCIEX16

slot.

Make sure that the card is properly seated on the slot.

2. For CrossFire

, you must enter the BIOS, set the

Initate Graphic Adapter

Advanced Menu

IGD

. Then press F4 to save the configuration and exit the BIOS.

* For reference only

+/- : Change Opt.

Enter/Dbl Click : Select





: Select Screen

/Click: Select Item

F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit

CrossFire: Output is IGD
Video

Main

Advanced

Chipset M.I.B.III Boot Security Save & Exit

North Chipset Configuration

IGD Memory

Auto

Initate Graphic Adapter

IGD

CrossFire

Enabled

Summary of Contents for A55F-M2 V.2.0











































































Search results

Summary of Contents for A55F-M2 V.2.0

Reviews:

Related manuals for A55F-M2 V.2.0

Brands by name

Popular brands

ECS A55F-M2 V.2.0, User Manual

Search results

Summary of Contents for A55F-M2 V.2.0

Reviews:

Related manuals for A55F-M2 V.2.0

Brands by name

Popular brands