ECS 945PT-A2/1333, Manual, Page: 44 / 50

38
Using BIOS
User Password (Not Installed)
This item indicates whether a user password has been set. If the password has been
installed,
Installed displays. If not, Not Installed displays.
User Password
This page helps you install or change a password.
Help Item
Install or Change
the password
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
User Password
F10: Save and Exit +/-/: Value Enter : Select
ESC: Exit
F9: Optimized Defaults F1:General Help
: Move
mnlk
Security Settings
User Password : Not Installed
Press <Esc> to return to the main menu setting page.
Save & Exit Setup
Highlight this item and press <Enter> to save the changes that you have made in the
Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears,
select [OK] to save and exit, or select [Cancel] to return to the main menu.
Exit Without Saving
Highlight this item and press <Enter> to discard any changes that you have made in
the Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog
box appears, select [OK] to discard changes and exit, or select [Cancel] to return to
the main menu.
This concludes Chapter 3. Refer to the next chapter for information on the software
supplied with the motherboard.
If you have made settings that you do not want to save, use the “Discard
Changes and Exit” item and select [OK] to discard any changes you have
made.
Change User Password Press Enter