ECS 945P-A, Manual, Page: 40 / 80

34
Using BIOS
DRAM Frequency [Auto]
Configure DRAM Timing by SPD [Enabled]
Boots Graphic Adapter Priori [PEG/PCI]
Auto Detect PCI Clk [Enabled]
Spread Spectrum [Enabled]
Onboard Device
Legacy USB Support [Enabled]
Audio Controller [Enabled]
LAN Device [Enabled]
LAN Boot ROM [Disabled]
Voltage Adjustment
Scroll to this item and press <Enter> to view the following screen:
X
CPU Vcore Voltage (Auto)
This item allows you to adjust the processor’s core voltage to give it a small boost.
1.8V of DDR2 (NORMA)
This item allows you to adjust the memory’s voltage.
VDDQ (NORMA)
This item allows you to adjust the Northbridge’s voltage.
CMOS Setup Utility - Copyright (c) 1985-2004, American Megatrends, Inc.
Help Item
Voltage Adjustment
CPU Vcore Voltage [Auto]
1.8V of DDR2 [NORMAL]
VDDQ [NORMAL]
Options
Auto
1.6000V
1.5875V
1.5750V
1.5625V
1.5500V
1.5375V
1.5250V
1.5125V
1.5000V
1.4875V
1.4750V
1.4625V
1.4500V
1.4375V
mnlk
: Move F1: General Help
+/-/:
Value ESC: Exit F10: Save
Enter : Select
F9: Optimized Defaults
F8:Fail-Safe Defaults F7:Previous Values
Press <Esc> to return to Advanced BIOS Features setting page.
DRAM Frequency (Auto)
This item determines frequency of DRAM memory.
Configure DRAM Timing by SPD (Enabled)
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial Presence
Detect) is located on the memory modules, BIOS reads information coded in SPD during system boot
up.
This option displays basic information about your system.
Advanced Chipset Features
CMOS Setup Utility - Copyright (c) 1985-2004, American Megatrends, Inc.
Help Item
Advanced Chipset Settings
Advanced BIOS Features
Options
Auto
533 MHz
667 MHz
mnlk
: Move F1: General Help
+/-/:
Value ESC: Exit F10: Save Enter : Select
F9: Optimized Defaults F8:Fail-Safe Defaults
F7:Previous Values