43
Using BIOS
User Password (Not Installed)
This item indicates whether a user password has been set. If the password has been
installed,
Installed
displays. If not,
Not Installed
displays.
Change User Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the
sub menu to install or change the user password. This item will show if the supervisor
password is set.
User Password
This page helps you install or change a password.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
User Password
User Password
: Not Installed
Change User Password
Press Enter
Install or Change the
password.
Save & Exit Setup
Highlight this item and press <Enter> to save the changes that you have made in the
Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears,
select [OK] to save and exit, or select [Cancel] to return to the main menu.
Exit Without Saving
Highlight this item and press <Enter> to discard any changes that you have made in
the Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog
box appears, select [OK] to discard changes and exit, or select [Cancel] to return to
the main menu.
Press <Esc> to return to the main menu setting page.
If you have made settings that you do not want to save, use the “Discard
Changes and Exit” item and select [OK] to discard any changes you have
made.
: Move
F10: Save and Exit
+/-: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
mnkl
ESC: Exit