ECS 945GCT-M2/1333, Manual

Page: 44 / 52

38
Using BIOS
DRAM Frequency (Auto)
This item shows the frequency of the DRAM in your computer. When it is FSB 1333
MHz CPU, the select options will be Auto, 533 MHz, and 667 MHz, and when it is
not FSB 1333 MHz CPU, the select options will be Auto, 400 MHz, 533 MHz and
667 MHz.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum (Disabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
CPU Frequency (Auto)
Use this option to adjust CPU frequency. And this item shows only when the FSB
reaches 1333 MHz.
Supervisor Password
This page helps you install or change a password.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Supervisor Password
Install or Change the
password.
Help Item Security Settings
Supervisor Password : Not Installed
Change Supervisor Password Press Enter
F10: Save and Exit +/-/: Value Enter : Select
ESC: Exit
F9: Optimized Defaults F1:General Help
: Move
mnlk
Press <Esc> to return to the main menu setting page.
Load Optimal Defaults
This option opens a dialog box that lets you install optimized defaults for all
appropriate items in the Setup Utility. Press <Y> and then <Enter> to install the
defaults. Press <N> and then <Enter> to not install the defaults. The optimized
defaults place demands on the system that may be greater than the performance
level of the components, such as the CPU and the memory. You can cause fatal
errors or instability if you install the optimized defaults when your hardware does
not support them. If you only want to install setup defaults for a specific option,
select and display that option, and then press <F7>.