ECS 945GCD-I230, Manual, Page: 36 / 50

30
Using BIOS
DVMT/FIXED Memory (128MB)
When set to Fixed Mode, the graphics driver will reserve a fixed portion of the
system memory as graphics memory. When set to DVMT Mode, the graphics chip
will dynamically allocate system memory as graphics memory, according to system
and graphics requirements.
.
Press <Esc> to return to the main menu setting page.
HPET (Enabled)
This item enables or disables HPET (High Precision Event Timer) support.
Onboard IDE Controller (Enabled)
Use this item to enable or disable the onboard IDE interface.
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Integrated Peripherals
DISABLED: disables the
integrated IDE
Controller.
ENABLED: enables both
Controllers.
Help Item
Onboard IDE Controller Enabled
Onboard SATA Mode Enhanced
Onboard AUDIO Function Enabled
Onboard LAN Function Enabled
Onboard LAN BOOT ROM Disabled
Serial Port1 Address 3F8/IRQ4
Parallel Port Address 378
Parallel Port Mode ECP
ECP Mode DMA Channel DMA3
Parallel Port IRQ IRQ7
USB Functions Enabled
Legacy USB Support Enabled
Onboard AUDIO Function (Enabled)
Use this item to enable or disable the onboard audio controller.
Configure DRAM Timing by SPD (Enabled)
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules. BIOS reads information coded
in SPD during system boot up.
DVMT Mode Select (DVMT Mode)
DVMT is Dynamic Video Memory Technology. This item helps you select video
mode.
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
Onboard SATA Mode (Enhanced)
Use this item to select the mode of the Serial ATA.
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Optimized Defaults F1: General Help