ECS 945GCD-CI, Manual, Page: 39 / 50

33
Using BIOS
Press <Esc> to return to the main menu setting page.
Resume on RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume at a fixed time based on the system RTC (realtime
clock). Use the items below this one to set the date and time of the wake-up alarm.
You must use an ATX power supply in order to use this feature.
Keyboard PowerOn (Disabled)
This item allows users to enable or disable the PS/2 keyboard to wake up the system.
Power On By PS/2 MS (Disabled)
This item allows users to enable or disable the PS/2 mouse to wake up the system.
PCI / PnP Setup
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PCI / PnP Setup
Select which graphics
controller to use as
the primary boot
device.
Init Display First PCI
Allocate IRQ to PCI VGA Yes
mnlk
: Move
F10: Save ESC: Exit
Enter : Select +/-/: Value
F9: Optimized Defaults
F1: General Help
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
Allocate IRQ to PCI VGA (Yes)
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system. You
set this value to No to free up an IRQ.
Press <Esc> to return to the main menu setting page.