20
Installing the Motherboard
1 .
Open the chassis and then remove the slot bracket from the case where you will
be installing the expansion cards.
2 .
Install your graphics card in the proper slot by pressing the card firmly into the
slot.
3 .
Drive in the screw to secure the slot bracket of the expanson card.
4 .
Replace your computer’s chassis cover.
5. Power on the computer, if necessary, set up BIOS utility of expansion card from
BIOS.
6. Install related driver to complete the installation.
Installing two graphics cards
Notes:
1. The two PCIE x16 slots run in two modes. With only one PCI Express
Graphics card, install it onto PCI-E1 slot by default. Having two PCI
Express Graphics cards at hand, set them up onto PCI-E1 and PCI-E3
slots simultaneously.
2. The Scalable D.G.E. supports a four-monitor configuration when PCIE x16
slot and PCIEx4 slot are working simultaneously.
3. Please note that the graphics card driver supports Windows 2000/XP only.
4. Make sure to connect a 4-pin ATX power cable to the ATX4P1; otherwise,
the system will be unstable.
Follow these instructions to install add-on cards:
Summary of Contents for 915PL-A2
Page 1: ......
Page 2: ......
Page 10: ...4 IntroducingtheMotherboard Motherboard Components...
Page 12: ...6 IntroducingtheMotherboard Memo...