36
Using BIOS
Super IO Configuration (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Onboard Floppy Controller (Enabled)
Use this item to enable or disable the onboard floppy disk drive interface.
Serial Port1/2 Address (3F8/IRQ4/2FB/IRQ3)
Use this item to enable or disable the onboard COM1/2 serial port, and to assign a port
address.
Serial Port2 Mode (Normal)
It Serial Port2 Address is not disabled, it allows you to set the Serial Port 2 Mode.
Parallel Port Address (378)
Use this item to enable or disable the onboard Parallel port, and to assign a port address.
Parallel Port Mode(ECP)
Use this item to select the parallel port mode.
ECP Mode DMA channel (DMA3)
This item assigns a DMA channel to the parallel port. The options are 0,1,and 3.
Parallel Port IRQ (IRQ7)
Use this item to assign IRQ to the parallel port.
Allows BIOS to Enable or
Disable Floppy Controller.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc.
SuperIO Configuration
OnBoard Floppy Controller
[Enabled]
Serial Port1 Address
[3FB/IRQ4]
Serial Port 2 Address
[2FB/IRQ3]
Serial Port 2 Mode
[Normal]
Parallel Port Address
[378]
Parallel Port Mode
[ECP]
ECP mode DMA channel
[DMA3]
Parallel Port IRQ
[IRQ7]
F9: Optimized Defaults
F8:Fail-Safe Defaults
F7:Previous Values
: Move
F10: Save
F1: General help
+/-/: Value
Enter : Select
ESC: Exit
Press <Esc> to return to the advanced setup page.
Summary of Contents for 915-M5
Page 1: ......
Page 2: ......
Page 10: ...4 IntroducingtheMotherboard Motherboard Components...
