ECS 865-M7, User Manual, Page: 55 / 92

49
Using BIOS
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
PC Health Status
On motherboards that support hardware monitoring, this item lets you monitor the param-
eters for critical voltages, critical temperatures, and fan speeds.
f
Target Temperature [Disabled]
Shutdown Temperature [Disabled]
Vcore (V)
3.30 V
5.00 V
12.00 V
1.50 V
5VSB (V)
VBT (V)
Current System Temperature
Current CPU Temperature
Current System FAN Speed
Current CPU FAN Speed
Current Power FAN Speed
Phoenix-AwardBIOS CMOS Setup Utility
PC Health Status
Item Help
Menu Level
mnlk
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Shutdown Temperature (Disabled)
Enables you to set the maximum temperature the system can reach before powering down.
System Component Characteristics
These items allow end users and technicians to monitor data provided by the BIOS on this
motherboard. You cannot make changes to these fields.
• Current CPU/System Temperature
• CPU Fan Speed
• CPU Core Voltage
• Battery Voltage
PCI/VGA Palette Snoop (Disabled)
This item is designed to overcome problems that can be caused by some non-standard VGA
cards. This board includes a built-in VGA system that does not require palette snooping so
you must leave this item disabled.
INT Pin1~8 Assignment (Auto)
Identifies the interrupt request (IRQ) line assigned to a device connected to the PCI inter-
face of your system.
Assign IRQ For USB (Enabled)
“Enable” or “Disable” this item when users are to assign IRQ for the USB interface onboard.
Target Temperature (Disabled)
This item enables throttling when CPU targets the temperature.