38
Wake Up Calls
If the system is suspended, or has been powered down by software, it can be
resumed by a wake up call that is generated by incoming traffic to a modem, a
LAN card, a PCI card, or a fixed alarm on the system realtime clock.
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
ACPI
function
[Enabled]
x ACPI Suspend Type
S1(POS)
Video Off Option
[Susp, Stby --> Off]
Video Off Method
[DPMS Supported]
MODEM Use IRQ
[Auto]
Hot Key Function as
[Power Off]
HDD Off After
[Disabled]
Power Button Override
[Instant-Off]
Power State Resume Control
[Always Off]
PM Wake Up Events
[Press Enter]
Delay Prior to Thermal
[None]
Menu Level
↑
↓
→
←
: Move Enter : Select
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General
Help F5:Previous
Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
ACPI Function (Enabled)
This motherboard supports ACPI (Advanced Configuration and Power man-
agement Interface). Use this item to enable or disable the ACPI feature.
Note:
ACPI is a power management specification that makes hardware status in-
formation available to the operating system. ACPI enables a PC to turn its
peripherals on and off for improved power management. It also allows the
PC to be turned on and off by external devices, so that mouse or keyboard
activity wakes up the computer.
ACPI Suspend Type (S1(POS))
Use this item to define how your system suspends. In the default, S1(POS),
the suspend mode is equivalent to a software power down. If you select S3
(STR), the suspend mode is a suspend to RAM, i.e., the system shuts down
with the exception of a refresh current to the system memory.
Video Off Option (Susp, Stby --> Off)
This option defines if the video is powered down when the system is put into
suspend mode.
Video Off Method (DPMS Supported)
This item defines how the video is powered down to save power. This item is
set to DPMS (Display Power Management Software) by default.
MODEM Use IRQ (Auto)
If you want an incoming call on a modem to automatically resume the system
from a power-saving mode, use this item to specify the interrupt request line
