ECRON TF-2000-AR, User Manual

Page: 43 / 46

CLEANING AND MAINTENANCE INSTRUCTIONS
Unplug the appliance from the mains before carrying out
any cleaning.
Ensure that you clean the body of the fan periodically using a
soft damp cloth to clean the external part of the machine
only.
Do not use corrosive products, solvents, harsh detergents or
sharp objects (such as knives or sharp objects) to clean the
appliance.
Do not let any water or other liquid get inside the motor. Do
not submerge the motor in liquids.
Clean the fan thoroughly and put it back into its plastic cover
before storing it.
Use the vacuum cleaner to clean the grill. Never remove the
grill.
When not in use, make sure that the appliance is stored in a
dry and fresh place.
In the event of a fault, never try to repair the fan yourself.
Refer all necessary repairs to an authorised repair centre.
1
．
All the function of this fan can be controlled from the
“soft-touch button on the unit’s control panel” or “the wireless
remote control”.
a. Turn on/off the fan
Press this button to turn on the fan. Press it again to turn the
fan off.
b. Speed function L M H
Each time you press the “Speed “ button the speed will
cycle between the “L M H”.
“L” ----- Low
“M” ----- Medium
“H” ----- High
c. Oscillating functio
To oscillate fan, press the “Oscillation” button .
Press second time to stop the oscillation.
d. Timer function
Setting the timer at desired time intervals. This fan has
8-hour timer – 1 hr, 2 hr, 4 hr & 8 hr.
Just simply press “Timer” button .
- press once, timer is set to 1hr;
- press twice, timer is set to 2hrs;
- press 3 times, timer is set to 4hrs;
- press 4 times, timer is set to 8 hrs;
- press 5 times, timer function is off.
e. M1/ M2 function
M1 refer to natural wind function while M2 refer to sleeping
wind function.
Press M1, this will automatically vary the fan speeds faster
and slower random.
Press M2, this will activate the sleep wind mode.
The wind speeds will be lowered cyclically in every 30 min-
utes until it reaches low speed level .
43
EN