RECEIVING INFORMATION
Shipping damage MUST be reported to the carrier IMMEDIATELY.
Examine exterior.
Remove cover and examine compressor and piping for signs of damage.
Inspection
Check shipment against bill of lading.
Verify equipment received as ordered.
Verify unit:
• Unit size and type correct per submittal sheet and
job requirements?
• Voltage correct?
• Hydronic coil included, if required? Piping located
as required?
• Factory installed options installed?
• All field installed options included?
Inspect each component for damage. Concealed damage
must be reported to carrier within 15 days of receipt of
shipment.
• Carrier must make proper notation on delivery receipt
of all damage identified and complete carrier inspection
report.
Purchaser must notify Manufacturer’s Service department
of all damage and is responsible for filing any necessary
claims with carrier.
Customer Service : (800) 228-9364
General Information
Installation shall be completed by qualified agency. Retain
this manual and warranty for future reference.
Installer review this manual to verify unit has been
installed correctly. Run unit for one complete cycle to
verify proper function.
To obtain technical service or warranty assistance
during or after installation, contact your local
representative.
Visit our web site www.retroaire.com for local
representative listing.
For further assistance call 1-800-325-5479.
When calling for assistance, please have following
information ready:
Model Number_________________________
Serial Number_________________________
Date of installation______________________
P/N 240010329, Rev. A [10/15/2013]
3
Made in USA
