English
3
Cooling Operation
Set the thermostat system switch to “COOL”, and the fan switch to “
AUTO”. Then set
the temperature by using the temperature selector on the thermostat. Now the
system will cool your house whenever the indoor temperature is above the
thermostat setting. It will shut off when the desired room temperature is reached.
Fan Only Mode
Set the system switch to “OFF” and the fan switch to “ON”. Now the system will run
only the fan to circulate and filter the air in your house. Be sure to return the
switches to their original positions for normal operation.
Continuous Air Circulation
Set the system switch to “COOL” and the fan switch to “ON”, with the temperature
selector at the desired level. This provides continuous air filtering and more even
temperature distribution.
System Off
Set the system switch to “OFF” and the fan switch to “AUTO”. This puts the system
on stand by mode with no cooling or fan.
Let the thermostat do its job.
Your air conditioner will perform most efficiently when you
let the thermostat control the system. Select a comfor
t
able temperature setting,
typically between 75° and 80° F.And allow the system to operate.
Once the temperature is set, you should leave your thermostat
alone. Manually adjusting the set point to extreme settings will not
cool or heat the room any faster.
Please remember that your system will not operate properly when the outdoor
temperature is below 65° F. A low-ambient kit is advised for operation in low ambient
conditions. Check with your dealer if needed.
SYSTEM MAINTENANCE
A heat pump is not a household appliance. It’s a self-contained system
that requires periodic professional maintenance . Other than performing the simple
maintenance recommended in this booklet, you should not attempt to make any
adjustments to your central air conditioning system. Your dealer will be able to answer
any questions you may have,and also assist you if problems develop.
Heating Operation
Set the thermostat system switch to “HEAT”, and the fan switch to “
AUTO”. Then set
the temperature by using the temperature selector on the thermostat. Now the
system will heat your house whenever the indoor temperature is below the
thermostat setting. It will shut off when the desired room temperature is reached.
Summary of Contents for H1318-601VAR
Page 8: ...Made in P R C...
