ECR International Ductless Series Installation, Operation And Maintenance Manual Download

Page: 3 / 40

PN 20009722 REV E, [02/11/2015]

RECEIVING INFORMATION

General Information

•

Installation shall be completed by qualified agency.

• Installer - This manual is property of owner. Leave

with owner when installation is complete.

• Owner - Retain this manual and warranty for future

reference.

When calling for assistance, please have following

information ready:

Model Number_________________________

Serial Number_________________________

Date of installation______________________

Receiving Inspection

• Inspect unit for damage. Report any shipping

damage to carrier immediately.

• Check rating plate on unit. Verify power supply meets

available electric power for installation.

• Verify unit received meets description of product

ordered, including applicable specifications.

Summary of Contents for Ductless Series









































Search results

Summary of Contents for Ductless Series

Reviews:

Related manuals for Ductless Series

Brands by name

Popular brands

ECR International Ductless Series, Installation, Operation And Maintenance Manual

Search results

Summary of Contents for Ductless Series

Reviews:

Related manuals for Ductless Series

Brands by name

Popular brands