1
Install the Hanger Hooks
©2016 ECR4KIDS, LP
Version: ELR-17254_2016.04.14
Care and Cleaning
Clean wood with a damp cloth or sponge
using warm water and mild soap. Wipe dry.
Do not place near heat, moisture or
vaporizer which may cause wood to warp
and peel.
Check for loose or worn parts periodically
and tighten or replace as necessary.
Record the manufacture date here.
Information is located on the Batch ID
sticker and on the shipping carton.
Save this sheet in an accessible place.
Model Number:
ELR-17254
Factory Code: EP
Manufacture Date:
Batch ID Number: ECR2016-1184
(Located on Part #)
We appreciate your purchase of the 10 Section Storage Locker.
ECR4KIDS has made every effort to supply a quality product that with proper
use and care, will provide many years of trouble-free use.
Warranty:
Visit our website for product specific warranty information at:
www.ecr4kids.com
If you experience any difficulties with this product, please email us at
or call toll-free at (855) ECR-4KIDS
(Monday - Friday, 7:00am - 4:00pm Pacific Standard Time)
Please do not return
to place of purchase as ECR4KIDS will
replace defective part(s) and/or product.
To prevent a tip-over tragedy:
Buy and install low-cost anchoring devices that can prevent TVs,
dressers, bookcases and other furniture from tipping. For more
information please visit www.ecr4kids.com/resources
If you did not pre-install the Hanger Hooks in Step 1;
Install four
Hanger Hooks (J)
to each section of the
Vertical Dividers (E)
by threading the
Hanger Hook Posts and
Screws (I1/I2)
together from both sides of the divider.
Install two
Hanger Hooks (J)
to each
Side Panel (E)
by threading the
Hanger Hook
Posts and Screws (I1/I2)
together from both sides of the panel.