Product Manual & Safety Instructions
www.ecoxotic.com
Cannon PRO LED Pendant
Step 4 - Mounting Methods and Instructions
Pipe Clamp Mounting Bracket
A. Locate mounting location on metal pipe. Ensure mounting location is capable of holding a weight of
4kg.. BRACKET MUST BE MOUNTED TO A STRUCTURAL MOUNTING POINT.
B. Attach pipe clamp to pendent swivel bracket by using included hardware and attaching to center
hole of swivel bracket. A washer should be located on each side of bracket. Tighten clamp bolt to
bracket using wrench.
C. Open pipe clamp by loosening thumbscrew and nut.
D. Place bracket at location and attach clamp by closing around pipe and tighten nut and thumbscrew.
D. Loop safety cable around pipe over point and run hook gripper end through loop. SAFETY
CABLE MUST BE USED AT ALL TIMES!
E. Attach safety cable hook gripper to pendant eyehook. Tightencable and remove any slack by
pushing cable into gripper.
To Adjust:
- Remove small locking bolt using small allen wrench
- Loosen adjustment bolt using large allen wrench
- Swivel pendant to desired angle
- Tighten adjustment bolt and locking bolt
Adjustment Bolt
Locking Bolt
Safety Cable
Gripper
Pipe Clamp
