The LED indicator will flash
RED
when the battery is running
low. Your SportBuds have a micro USB port to connect to
the USB cable and charge the unit by connecting it to a USB
port on a computer or to an optional USB to wall outlet power
adapter (
NOT
included).
The LED located on the top panel indicates the charging
status when connected to a power source:
•
BLUE
LED indicates a full charge
•
RED
LED indicates charging in process
NOTE:
Approximately 1 hour of continuous charging time
is required to fully charge your SportBuds.
RECOMMENDATION:
Use the USB cable included in the box.
Bluetooth Pairing and Connection Failure
Check if your Bluetooth device is still connected to another device.
Disconnect that device. Now reattempt to pair with the SportBuds.
LED Indicator Off
& ‘ECOXGEAR’ Not Available on Bluetooth Device
If the SportBuds have not been used for a long time, the unit may have
entered a dormant state.
PRESS & HOLD
for about 30 seconds to
turn on the unit.
Sound is Distorted or Interrupted
•
There is a barrier between device and SportBuds: Please clear it away.
•
The distance between the SportBuds and connected device is out of
normal connection range: Please bring them nearer to each other.
•
The LED indicator is flashing
RED
: The SportBuds battery is
low, please recharge it.
CAUTION:
Prolonged use of earphones at high volume may cause
irreparable hearing loss. We strongly advise you to adjust your
SportBuds volume to a reasonable level. The higher the volume for a
prolonged time, the higher the risk of damaging your hearing.
Use your BW20 SportBuds responsibly! It is dangerous, and even
illegal in some areas, to use earphones in situations that require your
full attention, such as driving a car or motorcycle, riding a bicycle, and
crossing a street.
Trouble Shooting
Charge Your SportBuds
