background image

You should never

  1) Never charge your ECOXGEAR if you suspect water has entered the device. Charging a 

 

device with water inside could be potentially hazardous and cause fire or  a spark.

 2) Never use your ECOXGEAR if you have dropped it or thrown it against a hard surface 

 

which may have destroyed the integrity of the speakers, housings, or gaskets. In the event 

 

of a severe impact to your unit please return the unit to Grace Digital to review for 

 

potential damage.

 3) Never open the auxiliary door in a water environment. This could cause water to ingress 

 

into the unit which could potentially be hazardous and cause a fire or  a spark.

 4) Never connect a device to the auxiliary input jack when in a water environment. The 

 

auxiliary jack should only be used in a dry environment.

 5) Never attempt to fix, repair your ECOXGEAR unit. Please send it back to Grace Digital for 

 

any assessments and repairs.

CARE, MAINTENANCE, & PRECAUTIONS:

 1) The unit is waterproof only when the cap is properly closed.
 2) Close the cap properly before use. If the unit is placed in water without the cap properly 

 

closed, water may enter into the  unit and void your warranty.

 3) Dry unit completely before opening the cap. Do 

NOT

 open the cap if wet or in a 

 

wet environment.

 4) Do 

NOT

 apply excessive force to any surfaces of the unit when wet or in a 

 

wet environment.

 5) Do 

NOT

 use or store the unit in places with high temperature. 

 6) 

AVOID

 prolonged exposure to ultraviolet radiation (UV sunlight) and strong 

 

magnetic fields.

 7) Periodically check the rubber seal for premature wear.
 8) Periodically clean the rubber with a soft moist cloth and ensure no objects such as 

 

dirt, hair, or sand are on the rubber seal ring. Do 

NOT

 use any oily solvent  or  chemicals 

 

for cleaning.

 9) Rinse off the unit with tap water after use in salt water or swimming pool.
10) Power and / or charge the built-in rechargeable battery for portable use by connecting 

 

the USB cord to a computer USB connection or to an AC outlet using the AC-to-USB 

 

cord 5V, 1A power adapter intended for use with the unit.

 11) Noise and audio distortion may occur when the batteries are nearing end of charge.
 12) Do 

NOT

 remove the built-in battery. Do 

NOT

 remove the grill covers.

Summary of Contents for GDI-EXYMH2XFX

















Reviews: