Master Power Switch
Sol Jam has a separate
Master Power Switch and
a Standby Button. The
switch
MUST
be set to the
ON position to power your
Sol Jam. Once the switch is
set to ON, use the Standby
Power Button
located on
the Top Panel to turn the unit
On/Off.
NOTE:
When not in use for
extended periods, turn the
Master Power off to preserve
battery life.
IMPORTANT:
Standby Power
function will
NOT
operate
when the Master Power is set
to OFF.
Input
Connect the USB cable to
the USB-C Input (5V, 2A) to
charge your Sol Jam.
RECOMMENDATION:
Use
the USB cable included in
the box.
NOTE:
Charge time
from low to full charge is
approximately 4 hours.
While playing audio, Sol Jam
can be charged or charge
your device. Battery play time
shall be reduced depending
on the time and size of
the device charging while
connected to your Sol Jam.
CAUTION:
Do
NOT
charge if
unit and/or connections are
wet or damp.
Back Panel: Functions
Output
Connect to the USB Output
(5V, 2.4A) port to charge your
personal device. Use the
USB cable included with your
personal device.
NOTE:
Charging rates are
similar to the charging rate
when connected to the USB
of a desktop PC.
Charge time is approximately
4 hours from low to full
for most smartphones;
however, charge times will
vary depending on the device
being charged, the device’s
battery specifications, and
the device features.
In some instances your
personal device may
not indicate if charge is
in process.
CAUTION:
Do
NOT
charge if
unit and/or connections are
wet or damp.
Audio AUX-IN
Connect an audio device
using the 3.5mm cable
connection as an alternative
to a Bluetooth connection to
your Sol Jam.
NOTE:
Volume level must
be controlled from the audio
device when connected to
the AUX-IN connection.
