Fully charge your ECOPEBBLE BEFORE you power ON for best performance. Connect the USB INPUT to the
USB micro cable and a power source to charge your ECOPEBBLE.
When charged, set the Main Power Switch to ON. Press the Standby Power Button to power on the
ECOPEBBLE from standby mode and to return to standby mode.
RECOMMENDATION: Use the USB cable included with the ECOPEBBLE.
• POWER FEATURE: STANDBY Power will NOT operate when the Main Power Switch is set OFF.
Once the Main Power Switch is set to ON, use the Standby Button to turn the unit ON/OFF.
• When not in use for extended periods, turn the Master Power OFF to preserve battery life.
Power, Connections & INDICATORS
Bluetooth Pairing & Audio
CONNECTING WITH BLUETOOTH: CONNECT TO YOUR SMART DEVICE & PLAY AUDIO
Power ON /
Bluetooth Paired
Charging*
*when connected with USB cable
Full Charge*
Bluetooth Pairing
Ready / Power ON
When your ECOPEBBLE is turned
ON, the LED light on the back panel
will flash BLUE, indicating the unit is
powered ON and ready to pair. The
unit shall also announce “Power ON”
or “Power ON, Pairing Ready” when
powered ON.
Turn on your Smartphone’s Bluetooth.
Set the Smartphone to pairing mode.
Available Bluetooth connections shall
appear. Select ‘ECOXGEAR’ from the
list of discovered devices on your
Smartphone. Wait a few seconds until
the connection is completed.
When the ECOXGEAR selection is
made and the Bluetooth connection
is complete, your ECOPEBBLE
announces, “Bluetooth connected.”
Once connected, select and play your
desired audio.
Your ECOPEBBLE should sync & wirelessly
pair with most Bluetooth enabled devices.
The unit remembers the last device
paired and will automatically search for
previous connections when the speaker
is turned ON from Standby or when a
device comes back into Bluetooth range.
If a connection is dropped, the speaker
will look to re-establish that connection.
If Bluetooth is turned OFF on your
Smartphone, the ECOPEBBLE may not
automatically look for the device.
PAIRING MODE
When paired, if you wish to put your
ECOPEBBLE in pairing mode you can
turn off Bluetooth on the Smartphone
connected to the device or turn the Main
Power Switch OFF/ON. Your ECOPEBBLE
should announce, “Power ON, Pairing
ready” when main power is turned back
ON and the device is ready to pair to a
Bluetooth connection.
RECOMMENDATION: If you are not
familiar with Bluetooth pairing for
your Smartphone or other Smart-
Device, refer to the User Guide for
your Smartphone to learn how to add
and pair a new device (ECOPEBBLE for
instance) to your Smartphone using
Bluetooth.
BLUETOOTH PAIRING &
CONNECTIONS
Once paired, should you have an
issue switching between Bluetooth
connections between devices, open
the Bluetooth Section within the
device currently connected to the
ECOPEBBLE and delete the Bluetooth
connection. The ECOPEBBLE will
then be available to pair & connect
to an alternate Bluetooth enabled
Smartphone / Audio Device.
LED STATUS
Summary of Contents for Ecopebble GDI-EGBP100-110
Page 1: ......
