Master Power Switch
& Connections
Master Power Switch
EcoEdge has a separate Master
Power Switch and a Standby
Button. The switch
MUST
be set
to the ON position to power your
EcoEdge. Once the switch is set
to ON, use the Standby Button
located on the top panel to turn
the unit On/Off.
NOTE:
When not in use for
extended periods, turn the Master
Power off to preserve battery life.
IMPORTANT:
Standby Power
function will
NOT
operate when
the Master Power is set to OFF.
AUDIO
AUX-IN
INPUT
ON
OFF
Audio AUX-IN
Connect an audio device using
the 3.5mm cable connection
as an alternative to a Bluetooth
connection to your EcoEdge.
NOTE:
Volume level must
be controlled from the audio
device when connected to the
AUX-IN connection.
Input
Connect the USB cable to the
USB micro Input to charge
your EcoEdge.
RECOMMENDATION:
Use the
USB cable included in the box.
NOTE:
Charge time from low
to full charge is approximately
3 hours.
While playing audio, EcoEdge
can be charged.
CAUTION:
Do
NOT
charge if
unit and/or connections are
wet or damp.
