4
REMOTE CONTROL
Mini Split Inverter
EDFM
1
2
3
The remote control is powed by two
dry batteries (AAA) housed in the rear
part and protected by a cover.
Remove the cover by pressing and
sliding off.
Remove the old batteries and insert the
new batteries, placing the(+) and (-) ends
correctly.
Reattach the cover by sliding it back
into position.
REPLACING BATTERIES
The remote control can be attached to a wall
or pillar by using a remote control holder(not
supplied, purchased separately).
Before installing the remote control, check that the
air conditioner receives the signals properly.
Install the remote control with two screws.
For installing or removing the remote control,
move it up or down in the holder.
The following may occur when the batteries have ran out of charge. Replace old
batteries with new ones.
Receiving beep is not emitted when a signal is transmitted.
Indicator fades away.
USING THE REMOTE CONTROL HOLDER(OPTIONAL)
Summary of Contents for RG57A7/BGEF
Page 16: ......
