ECOWITT WH2910, Operation Manual

Page: 22 / 67

22
The console has eight buttons for easy operation:
Button Description
SET Press and hold to enter the SET mode.
TEMP.  Press to switch between Outdoor Temperature, Wind Chill,
Heat Index, Dew Point.
 To bypass RF reception, press and hold while powering up
the console (connecting the AC adapter with batteries
removed).
 Hold this button for 5 sensors will re-register all the sensors
RAIN Press to switch between Rain Rate (in/hr), Rain Event, Rain Day,
Rain Week, Rain Month, and Rain Total.
WIND +
 Press to switch between average wind speed, wind gust and
wind direction.
 While in SET mode, press to increase the value. Press and
hold for two seconds to increase the value rapidly.
PRESSURE
- 
Press to switch between Relative Pressure (current), and
12hr, 24hr, 48hr and 72hr average Relative Pressure.
 While in SET mode, press to decrease the value. Press and
hold for two seconds to decrease the value rapidly.
ALARM Press to switch between high and low alarms
MAX/MIN Press to switch between minimum and maximum values.
LIGHT
/SNOOZE 
Press to adjust the LCD backlight brightness (high, medium
and off).
 Press to exit the SET mode at any time.
Note:
1) When power on, press
WIND/+
and
PRESSURE /-
button to reset the
weather station and clear all records memory, and clears all user settings to
default.
2) The setting procedure can be exited at any time by either pressing the
LIGHT /SNOOZE button or waiting for the 30-second time-out to take
effect.