How to Use
For stubborndirt
Clean with cleaning solvent first and then scrub.
Spray the cleaning solvent and wipe
Suck up the dirt
· Absorb the dirt and do not leave any solvent
Use of right-angled water sucker
Press the water sucker on the back of the chair and
move from top to bottom
·9·
Attention
Do not put the cleaning solvent in
the clean water bucket, make sure
the solvent is not harmful to the
carpet before use.
Do not use diluents, aniline,
chloro form and flammable
solvents.
Recommended
·
Alkali ionized water
·
Heavy bacteria
·
Citric acid
·
Hydrochloric acid water
Not recommended
·
Neutral detergent for the kitchen
·
Alkaline detergent
·
Acid detergent
1
Apply the cleaning solvent to the carpet and
rub the dirt with a brush to lift it up.
Attention
For the amount and usage of the
cleaning solvent, please read the
manual carefully and use it correctly.
Instructions
3
Press the watering button to spray clean water
2
Tum on the power(start)
1
Plug it in
4
Absorb water
5
Tum off the power(stop)
6
Unplug it
7
Pour away clean water and sewage, and clean
the sewage bucket
Attention
Turn off the power before unplugging it.
After use, please hang the coiled power
cord back to its original place.
Spray clean water while absorbing sewage
Press the water suction inlet on the stain,
bring the water and dirt to the front and suck them.
Stop spraying, and absorb the sewage
After using the cloth on which water is easily retained,
please blow dry or air dry.
·8·
Solvent Dirt
Dirt floats
Attention
Stop using when the water i the sewage
bucket exceeds the maxim um water level,
clean the sewage bucket otherwise, the water
will flow into the machine
Foam
Maximum water level
Sewage bucket
Spray the stain with clean water to let it surface. Do not
spray continuously at the same spot. After spraying,
absorb the water, so as not to cause mildew and odor.
Summary of Contents for WDV01
Page 1: ...SPOT CLEANER ...
