24
EN
No.
Malfunction
Possible Causes
Solutions
1
DEEBOT is not charging.
DEEBOT is not switched ON.
Switch ON DEEBOT.
DEEBOT has not connected to the Docking
Station.
Be sure that the robot’s Charging Contacts have
connected to the Docking Station Pins.
The battery is completely discharged.
Re-activate the battery. Switch ON DEEBOT. Place
DEEBOT on the Docking Station by hand, remove after
charging for 3 minutes, repeat 3 times; then charge
normally.
2
DEEBOT cannot return to the
Docking Station.
The Docking Station is not correctly placed.
Refer to Section 3.2 to correctly place the Docking
Station.
3
DEEBOT gets stuck while
working and stops.
DEEBOT is tangled with something on the floor
(electrical wires, curtains, carpet fringing, etc.).
DEEBOT will try various ways to free itself. If it is
unsuccessful, manually remove the obstacles and restart.
4
DEEBOT returns to the Docking
Station before it has finished
cleaning.
When the battery gets low, DEEBOT
automatically switches to Return to Charger
Mode and returns to the Docking Station to
recharge itself.
This is normal. No solution necessary.
Working time varies according to floor
surface, room complexity and the Cleaning
Mode selected.
This is normal. No solution necessary.
6. Troubleshooting
Summary of Contents for Deebot 710
Page 1: ...Instruction Manual Manuel d instructions Manual de instrucciones...
Page 20: ...20 EN 4 3 Other Components Side Brushes 1 2 3 4 Maintenance...
Page 45: ...45 FR CA 4 Entretien 4 3 Autres composants Brosses lat rales 1 2 3...
Page 69: ...69 ES LATAM 4 Mantenimiento 4 3 Otros componentes Cepillos laterales 1 2 3...
