Ecotech GTS RIV-601F, Applications Manual

Page: 11 / 28

rev. 0 NOV11 MAFP 10-GB
Mounting information
The waterproof model RIV-601P/F can be installed without any
bracket by means of four screws.
The explosion-proof model RIV-601P/FA is made by mounting the
model RIV-601P/F inside the explosion-proof enclosure model
ADF-600AP. It will be installed on the requested position using the four
screws included in the package.

- Vertical application with FULL area coverage.
The detector must be installed over the area to be monitored, looking
down vertically on the centre, at a height that is 0.7 times the side of
the area (square).
For example, from a height of 10 m a floor area of 14x14m can be
controlled.
This sort of installation uses the full detector field of view, that is the
best one.
All floor area is covered.
Since the detector sensitivity is 2% of the distance (4% for the
explosion-proof model), the smallest detectable flame size is 20cm at
the centre where the distance is 10m, and 28cm at the corner where
the distance is 14m.
RIV-601P/F
IR flame detector applications
height
width
length
RIV
Note:
Remember that the detector sensitivity is 2% of the distance, while 4% for the explosion-proof model