Ecostrad_Sunglo_V1.2_25062021 10
6 | Maintenance
Careful and regular maintenance of the heater according to the instructions below
is required to maximise the longevity and efficiency of your appliance.
•
Check the cleanliness of the heater at least once a month. If needed, follow
the cleaning instructions below. If the heater is being used in a dusty
environment, the number of checks should be increased.
•
Check the reflector, grille and frame for deformation visually while cleaning
the appliance. If deformity is found, consult a qualified technician.
•
Check the power cable and plug visually while cleaning the appliance. In
case of any deformation, consult a qualified technician.
The heater should be switched off and unplugged from the socket if:
•
You intend not to use the heater for a prolonged period of time.
•
You want to change the location of the heater.
•
Cleaning or maintenance is being conducted.
7 | Cleaning
Regular and careful cleaning will keep your heater operating efficiently for many
trouble-free years.
1.
Unplug the heater power cable and wait for the heater to cool down
before cleaning your appliance. This is essential for your safety.
2.
The heater’s outer casing may be cleaned with a soft, damp cloth. You may
use a mild detergent if necessary. CAUTION: do not let liquids enter the
heater.
3.
After cleaning, dry the unit with a soft cloth.
4.
Do not use alcohol, petrol, abrasive powders, furniture polish, or rough
brushes to clean the heater. This may cause damage or deterioration to the
surface of the heater.
5.
Do not immerse the heater in water to clean.
6.
Wait until the unit is completely dry before next use.
7.
Store the heater in a cool, dry location when not in use to prevent dust and
dirt build up. Use packaging carton to store.
NOTE –
damage incurred by use of your heater in an unclean state is not covered
by the warranty. Products returned in a dirty state will not be refunded or replaced.
