Ecosmo 26CF01 Assembly Manual Download Page 3

 

Safety  

It is always advisable to have your bicycle properly assembled by a bicycle 
professional. This setup and ongoing maintenance will ensure a proper and safe 
setup and long life for your new folding bike.  

• Before riding your bike for the first time, make sure to familiarize yourself with the 
location and operation of all the quick release levers on your bike.  

• Before each ride, check to make sure all latches and quick releases are properly 
secured. Also check your brake system and tire pressure. Proper inflation for your 
tires is indicated on the tire’s sidewall.  

• Do not over-tighten the quick release levers. Always hand tighten until clamping is 
snug. Never use a tool or wrench to tighten the quick release levers.  

• Never operate the bicycle if the frame, wheels or quick release levers are 
damaged.   

• Rider’s weight including luggage should not exceed 100 kg or 220 lbs.  

• Make sure that the seat post quick release is securely fastened and that the seat 
post does not slip before you ride.  

• Proper maintenance and adjustment of your bike will greatly increase riding safety 
and performance.   

• To keep bicycle in optimum operating condition, always dry the bicycle after use in 
wet riding conditions.  

• Reflectors alone are not adequate for riding at night. Front and rear lighting 
systems are recommended to increase visibility.  

• Always wear a helmet when riding your bike.  

• This bike is designed for adult users only.   

• Before your first ride, be sure you know all local traffic regulations. Remember to 
comply with all bicycling safety laws and use common sense especially in adverse 
weather conditions.  

• Ecosmo Ltd is not responsible for accidents resulting from failure to comply with 
all bicycling safety laws, careless driving or improper maintenance of your bicycle. 

 

 

Summary of Contents for 26CF01











Reviews: