8
Angle the saddle so that it is parallel to the ground or at a preferred angle for
comfort when seated on the bicycle.
Tighten the bolts on opposite sides of the seat post connector with a 14mm or
adjustable wrench. Alternate sides after each rotation to tighten evenly: tighten one
side a full rotation, then the opposite side a full rotation, and vice-versa until each
bolt is completely tight and there is no movement in the saddle angle.
Connecting the pedals
Your bike includes a set of pedals. The pedals are
marked on the end of the pedal axle: “R” for “Right” and
“L” for “Left.” When seated on the bike, your right foot
would correspond to the right pedal and your left foot
would correspond to the left pedal.
L
R
Please note you need to screw the right pedal clockwise into the crank eye, and
screw the left pedal anti-clockwise into the crank eye. If it does not turn easily do not
force it and double check that you have choosen the correct pedal doing in a
correct way.
Forcing the wrong pedal going in will damage the thread on your pedal
and crank arm.
