If you suspect a problem with your unit check the following:
1) Unit is plugged in properly.
2)
It’s important that the Ozone Generator be properly grounded
to avoid potential shock.
3) Fuse is installed properly and in good condition. To replace
fuse, pull out the plastic fuse holder, remove old fuse and
insert new fuse.
2 Amp (1.58 inch) for 110-120V;
1 Amp (1.58 inch) for 220-240V
.
Refer to picture as follows:
Summary of Contents for Ozone Blaster WA
Page 6: ... Front View Back View ...
