How to clean the ozone plate:
Wash the stainless steel screen and ceramic plate using a spray
cleaner or detergent. Scrub with a stiff brush. A spray liquid cleaner
with ammonia or chlorine may also be used to remove any non-
visible adherents. Be careful not to drop the plate. Rinse plate
thoroughly in hot water and dry completely before reinstalling. A hair
dryer may be used to dry the plate more quickly.
When running the device, it has a burning smell, and/or appears to
be
Ozone produces a smell or odor that smells like bleach or electric
smell. This is normal during Ozone use.
If you suspect a problem with your unit check the following:
1) Unit is plugged in properly.
2)
It’s important that the Ozone Generator be properly grounded
to avoid potential shock.
Fuse is installed properly and in good condition. To replace fuse, pull out
the plastic fuse holder, remove old fuse and insert new fuse. (
110-120Volt,
6Amp, or 220-240 Volt, 3 Amp)
Refer to picture as follows:
Summary of Contents for Ozone Blaster 20g
Page 6: ... Front View Back View ...
