Ecoped 2012 Pulse, Rider'S Manual

Page: 20 / 38

20
CHARGING ECOPED PULSE
The Ecoped Pulse battery can be charged using two methods –
through the scooter (which means that you don’t need to remove the
battery) and separate from the scooter. You should not use a diff erent
charger than the one supplied with your Ecoped Pulse. As well, avoid
charging the battery in areas with lots of dust.
1. Park your scooter near a standard electrical outlet.
2. Connect the charger to the wall outlet.
3. Place the charging brick on the scooter footrest.
4.
Connect the charging cable to the port located below the seat.
5. Allow for clear ventilation around all sides of the charger and do
not place it on thick carpet or on wet fl oors.
6. The charger will automatically shut off when the battery is
charged (allow for up to 8 hours).