Econo CAM-20XB, Manual, Page: 9 / 27

- 9 -
Suppose the machine is installed room inside and ventilation is not good, air duct is needed
to conduct condensing air outside. But the duct should be as short as possible to avoid big
pressure drop
；
The machine may be installed above the ground or the roof, keeping enough space between
the bottom plate and ground. In order to assure draining water effectively. And the bracket must
has enough carrying capacity;
Hydraulic circle charged with clean water, no dust or oil. Soft water is recommended
；
Make sure no barrier around the unit, ensure the good ventilation of condensing air flowing.
Make sure that the released air from condenser or unit operating noise will not impact the
living of neighbor.
The unit must be installed firmly, and the bottom of unit must be horizontal (the gradient
must be less 5 degree)
Keep enough space between the machine and wall. It is convenient for unit's repairment and
maintenance: and also you shouldn't lay the pipelines and top-ray tubes on the unit. The
suggested installation location as below. (Unit: mm)
o v e r 10 0 0
o v e r 1 0 0 0
o v e r 1 0 0 0
ov
er
30
0
o v e r 1 0 0 0
ov
er
30
00
s u c k i n
s u c k i n
s uc k i n
ex
ha
us
t
②
② ②
②
Attention of moving machine
Fork lift stacker or crane is suggested to move the machine
；
The surrounding ambient temperature of unit during transportation must be among –25 to 55