Prepare your EVC200 Bulldog Controller
Plug the 6 pin mini din (PS2) cord then the power cord into the EVC200 control unit.
In the Smartthings App, use the + sign ->Add Device-> By brand -> EcoNet Controls
Select Valve then on the next screen (Start)
Select your Hub and a room, Select Next
The screen will display “Press the button three (3) times.
Immediately press the button on the EVC200 controller 3 times quickly.
Wait and watch the Smartthings App. This can take over a minute to finish.
If the controller isn’t added after a minute. Press the button 3 times again.
If this still fails, close the Smartthings App and try again.
Create Automation so your Valve Closes when a Sensor is Wet
In Smartthings, Automations, Create Routines so that when a Sensor is wet, the Valve closes.
Sample Routine:
