Sept 30, 2022
Thank you for purchasing the Bulldog ZWave/Zigbee Smartthings complete Solution. This basic quick
start guide is designed to help you to Install Smartthings and add in your new leak prevention devices.
Note: This kit is considered an Enthusiast level kit and requires some extra steps to install and configure.
Contents:
1x Smartthings Hub
3x ThirdReality Zigbee Leak sensor
1x EVC200 Kit
1x EVC200 Controller
1x Power Adapter
1x Bulldog Motor Assembly
2x Mounting brackets, Bottom Pin Guide, 2x Guide Pin Assemblies
EVC200 Bulldog Quickstart Guide
This document
Getting Started:
Prepare Smartthings App and Hub
Download the Smartthings App on your iOS or Android Device
Use the + sign ->Add Device-> By brand -> Smartthings
Choose Smart Home Hub -> Smartthings Hub (IM6001V3P)
Follow the app directions to complete
Prepare Leak Sensors – ThirdReality
Open each leak sensor using a slot screwdriver
Insert batteries
Put leak sensor into Zigbee pairing mode
o
Hold down the small button until LED (on other side) turns red
o
o
Release the button. The LED will blink Blue
Scan for devices in Smartthings
Change the name of the Leak Sensor to something meaningful
Smartthings will download the latest EDGE driver for your Water Sensor
