25
the battery module into the phone until the retaining spring audibly clicks in place. Mount the
charging socket cover (
x.
com
50x –Ex) respectively the safety plug (
x.
com
60x –Ex)
7.1.3 Charging the battery
Your phone is supplied with power via a rechargeable battery. Before a new battery
can be used for the first time it must have been charged for at least 4 hours. The
full battery performance is only obtained after a few operating cycles.
If the battery charge level falls below the operating value, the phone will indicate
this (the empty battery symbol flashes). When this appears charge the battery for at
least 15 minutes before making any other calls, in order to prevent your call from
being interrupted.
Proceed as follows to charge the battery:
Connect the charger to a wall outlet.
Insert the end of the charging plug into the designated charging socket.
The phone‘s battery will now be charged. The battery symbol indicates that the
battery is being charged. When the battery is fully charged the charging process
stops automatically. Remove the
charging plug from the phone.
Batteries can become warm during the charging process. This is a normal occurrence.
NOTE
- There is a risk of explosion if the battery is not exchanged properly or if it is exposed to a
flame.
- Do not short-circuit the battery.
- The battery does not contain any parts that can be exchanged.
- The casing of the battery should not be opened under any circumstances.
- Only use ecom charging accessories (see point 4).
- The use of other chargers or batteries is not permitted. If such items are used, your
Ex-protection will expire.
- Used batteries are to be disposed of properly.
