Ecom Instruments Lite-Ex LED 30, Operating Instructions Manual

Page: 3 / 13

1. Introduction
Easy to operate, the Lite-Ex LED 30 is a
compact and robust LED torch, making it
ideal for inspection lighting within
Ex-hazardous areas classified as either
Zone 2, 1 and 0 as well as 22 and 21
according to 1999/92/EC (ATEX 137).
2. Safety Advice
This operating manual contains information
and safety recommendations which
must be complied with in order to
guarantee safe functioning of the unit
under conditions described. Non
compliance with this information and
recommendations can have dangerous
consequences or infringe regulations.
Please read these operating instructions
very carefully before using the unit !
In case of any doubt
(e.g. due to translation and/or printing
errors) the original German language ver-
sion should be referred to.
3. Faults and Damage
If there is any reason to suspect that the
safety of the unit has been affected then it
must be immediately withdrawn from use
and precautionary measures taken in order
to prevent any further use of in the Ex-
hazardous area. It is recommended that the
equipment be then sent back to the
manufacturers for testing.
For example, the safety of the unit
could be endangered when:
- External damage to the housing.
- Exposure to excessive loads.
- Incorrect storage of the unit.
- Damage sustained in transit.
- Correct certification is illegible.
14
BAL Lite-Ex LED 0.indd .0.00 ::0 Uhr