background image

31

In connection with WAP: Message „No 

response from server“ is displayed.

Switch off the phone and then switch 

it back on again.

Connection to home page is not 

possible.

Select the option „Empty cache“ 

under „WAP > Menu services“.

The name of the network operator is 

not indicated in the display.

Select „Menu > Settings > Networks > 

Select“ to choose the desired network 

operator.

Check the setting under „Menu > 

Settings > Display > Network Operator 

Logo“. This must be activated to 

display the network operator.

How do I enable/disable the keypad 

lock function?

Press and hold the * button for at least 

2 seconds to enable or disable the 

keypad lock function.

How do I activate the silent mode?

Press and hold the # button for at 

least 2 seconds to enable or disable 

the silent mode.

How do I activate the magnifying glass 

function?

The magnifying glass can only be 

activated in the SMS, MMS and WAP 

display. To activate it press and hold 

the # button for at least 2 seconds.

How do I get rid of the message that 

is displayed on the welcome screen ( 

„1 Call“)?

Press the red call button to deactivate 

the message display without having 

read the message.

How do I get rid of the envelope in the 

welcome screen?

The envelope indicates that you have 

received a new SMS message. Ac-

cess the SMS message to deactivate 

the symbol.

How do I get rid of the symbol for 

voice messages in the welcome 

screen?

The symbol for voice messages 

indicates that there is a new voice 

message in your mailbox. Call your 

mailbox and listen to your new messa-

ges to deactivate the symbol.

If the problem persists, please contact the ecom instruments GmbH  

service department.

Summary of Contents for Ex-Handy 05
















Reviews: