Ecom Instruments Ex-GSM 01 EU, Operating Instructions Manual

Page: 13 / 42

54
To refuse an incoming call, press the button for ending a call.
To switch the ring tone to silent, press
Silent . You can then either accept
or refuse the call.
7.3.3 Options during the call
Many of the options that you can use during a call are network services.
You can obtain information about availability from your network operator
or provider.
Select
Option
during a call and then one of the following functions:
Call options are Microphone off or Microphone on, Address book, Menu,
Record, Lock keypad, Automatic volume on, loud speaker or Telephone.
Options for network services are Accept and Refuse , Hold or Accept, New
call, Accept in Conf., End call, End call, End all calls
and the following:
DTMF send for sending DTMF tones.
Two-way splitting
to change between the active call and call on hold.
Forward to connect a call on hold with an active call, while disconnecting
your connection to the two calls.
Conference
to set up a telephone conference with up to five participants
Private call for a private discussion during a telephone conference
Warning: Do not hold the unit up to your ear if the loud speaker is being
used, since the volume may become very loud.
7.4 Text input
To enter text (e.g. for short messages), you can use the traditional text
input or the predictive text input. When using the traditional text input,
press a number key (1 to 9) until the desired character is displayed. With
automatic text input, you can enter a letter by pressing a key one time.
When writing the text, predictive text input is indicated by and the
traditional text input by on the upper left of the display. , or
next to the text input symbol signifies upper or lower case.
To change the upper or lower case writing and the text input mode, press
the „#“ button. indicates the numbers mode. To change from the letter
to the number mode, hold down the “#” button and select Number mode.