Ecolab Lubo-DryExx -Basic, Operating Instruction

Page: 34 / 42

417101633_DryExx_Basic - 34 - Rev.: 6-02-15
6.2.3.2.2 Lubrication circuit configuration
Fig. 6.20
Fig. 6.21
Screen “Configuration circuit 1“(Example applies to all
circuits):
• Spray time for this circuit (automatic operation)
• Pause time for this circuit (automatic operation)

Leave screen and go back to "Configuration menu"
(see chapter 6.2.3.2 )

Button "ESC"

Jump to screen "configuration circuit (-1)"

Button „  “

Jump to screen "configuration circuit (+1)"

Button „  “

Call of Boost-Time

Button „F1“

Call of Circuit-Time

Button „F2“
After leaving screen “Lubrication circuit configuration” you come back to “Configuration menu”
(see chapter 6.2.3.2 ).

Jump to screen „circuit configuration“ for another circuit

Buttons 1 to 8 (dependent on lubrication circuit selected)

To leave the screen “configuration menu”

Button "ESC"
After leaving screen “Daily archive” you come back to the "Main menu" (see chapter 6.2.3 ).

Jump to screen “configuration date and time“ (see chapter 6.2.3.2.3 )

Button "3"
6.2.3.2.3 Configuration date and time
Fig. 6.22
Screen “Configuration date and time”:
• System date
• System time

Leave screen and go back to "Main menu" (see chapter 6.2.3 )

Button "ESC"
After leaving screen “Configuration date and time” you come back to the "Main menu"
(see chapter 6.2.3 ).

Jump to screen „Information PLC version“ (see chapter 6.2.3.2.4 )

Button “4”
6.2.3.2.4 Information PLC-Version
Fig. 6.23
The following is displayed in the screen „PLC-version“

Current number of the PLC software used

Leave screen and go back to "Main menu" (see chapter 6.2.3 )

Button "ESC"
After leaving screen “Information PLC-Version” you come back to the "Main menu"
(see chapter 6.2.3 ).

Jump to screen "Alarm" (see chapter 6.2.2 )

Button “5”

Fault acknowledgement

Button “6”
6.2.3.3 Acknowledging
After press button „ack“ no other image is displayed.
You are still in the „Main menu“ (see chapter 6.2.3 )!

Jump to screen "operating mode"

Button “7”