50
System Info #7.0
1. Last Visit
2. Load Counts
3. Empty Alarm
4. Formula Not Finished
5. System Error
6. Condor Software
7. OPL Software
8. IO Software
9. WE Signal Software
10. Formula Select Software
11. Water Temperature
11. W
ATER
T
EMPERATURE
System Info>Water Temperature #7.11
1. Total Pockets Temperature
2. Average System Temperature
1. T
OTAL
P
OCKETS
T
EMPERATURE
System Info>Water Temperature #7.11
1. Total Pockets Temperature
2. Average System Temperature
2. A
VERAGE
S
YSTEM
T
EMPERATURE
System Info
>Water Temperature
#7.11.1
Above 150 F Below 100 F
1. (Detergent)
0
0
2. (Bleach)
0
0
3. (Finish)
0
0
4. (Product4)
0
0
System Info
>Water Temperature
#7.11.2
Average : 0 F
Note:
You can Narrow down Water Temperature values for a certain period of time (provided the
controller clock has been properly set up
–
Quick Setup > 4. Date & Time
)
2.8.
Submenu #8.0 Diagnostics
Program Menu
1. Account Menu
2. Quick Setup
3. System Menu
4. Formula Menu
5. Prime Pump
6. Calibration
7. View System Info
8. Diagnostics
8. D
IAGNOSTICS
2.8.1.
Submenu #8.1 Diagnostics>WE Components
The Diagnostics Menu consists of 3 sub-menus allowing for functional verification of all modules connected to the
Condor controller, and all discrete components controlled by the IO board (main water valve, washer valves, product
valves, etc.).
Some diagnostic functions can only be performed when no formulas are selected on any washer.
