4.1
Construction
4.1.1
Overview
Fig. 2: Construction Turbo SMART II
I
Pump module
Chapter 4.1.2 ‘Pump module’ on page 22
II
Back cover module
Chapter 4.1.3 ‘Back cover modules’ on page 23
1
Coupling nut (connection on discharge side)
2
LED signal
3
Housing screw (4 x)
4
Pump head (cover)
5
Safety drain (for diaphragm failure)
6
Coupling nut (connection on intake side)
7
Mounting lug (2 x)
8
Cable bushing for power supply connection
for 24 V DC or 230 V AC depending on version.
Chapter 4.1.3 ‘Back cover modules’ on page 23
4.1.2
Pump module
Fig. 3: Pump module
I
Pump module
2
LED signal
3
Housing screw (4 x)
4
Pump head (cover)
9
Cover plug for speed adjustment
10 Pump head
11 Potentiometer (Poti)
12 Motor board
13 Pump motor
14 Labyrinth seal
J1 Jumper “pump head adaption”
J2 Jumper “capacity” (
as delivered)
Functional description
22
Rev. 5-06.2018
