1.7
Warranty
The manufacturer provides a warranty for operational safety, reliability and performance
under the following conditions only:
n
Assembly, connection, adjustment, maintenance and repairs must be carried out by
qualified and authorised specialists with the aid of the User Manual and all the
provided documents.
n
The use corresponds to the information in the operating instructions.
n
Only original equipment spare parts are used for repairs.
Our products are built, tested and CE certified in accordance with current
standards/guidelines. They left the factory in a safe, faultless condition.
To reach this condition and to ensure an trouble-free operation, the user
must pay attention to all the information / warning information, maintenance
regulations, etc. that are contained in all the corresponding Instructions for
Use and that may be attached to the product.
The general warranty and service conditions of manufacturer apply.
1.8
Contacts
1.8.1 Manufacturer's contact address
Ecolab Engineering GmbH
Raiffeisenstraße 7
83313 Siegsdorf, Germany
Telephone (+49) 86 62 / 61 0
Fax (+49) 86 62 / 61 166
Email: [email protected]
http://www.ecolab-engineering.com
1.8.2 Technical support contact
ECOLAB Engineering GmbH
If you contact technical support, make
sure to include the type code in the
e-mail. The type code is the only way
to identify the metering station and its
documentation. You can find the type
code on the rating plate.
Raiffeisenstraße 7
83313 Siegsdorf, Germany
Telephone (+49) 86 62 / 61 234
Fax (+49) 86 62 / 61 166
Email: [email protected]
http://www.ecolab-engineering.com
General information
10
MAN048961, Rev. 2-09.2020
Summary of Contents for 10240138
