● INSERTING BATTERIES
5
SAFTEY FEATURES
The remote has six keys that have following functions:
P
ress to switch the heater on
. P
ress again to switch off.
Press this key to select desired power setting: Low setting
（
) , high setting ( ).
V
alue adjustment key
. P
ress it to increase temperature setting.
V
alue adjustment key
. P
ress it to decrease temperature setting.
Press this key repeatedly to set the timer.
P
ress this key to start or stop the oscillation.
1. Press down on the battery compartment cover and slide it out.
2. Insert the batteries, making sure that the positive terminals are facing the proper
direction, marked inside the battery compartment.
3. Close the cover by sliding it in.
Notes: 1) Use two “AAA” batteries (NOT INCLUDED).
2) Do not mix old and new batteries.
3) Do not mix alkaline, standard (carbon-line) or
rechargeable (nickel-cadmium) batteries.
4) Remove the batteries from remote if is to be
left unused for a long period of time.
remote
battery
cover
Thermal cut-off: This heater includes a thermal cut-off that shuts the heater off if it
overheats due to abnormal conditions. If this occurs, turn the heater off, unplug it,
and inspect and remove any objects on or adjacent to the heater. Allow it to cool for
a few minutes, and then plug it back in and resume normal operation.
Tip-over switch: This heater includes a safety tip-over protection feature that will
shut the heater off in case it is tipped over. If, at any time, the heater tips over,
please put the heater back in the upright position. The heater will resume its normal
operation.
