53
Screw the WiFi antenna to the docking station. This magnet base must be stuck to the back of the boiler.
Once assembled, the unit has to remain in a vertical position.
Drawing 18
Place the magnet connection base with the antenna where appropriate. When possible, avoid the presence
of metal sheets around the antenna as the WiFi signal might be distorted.
WiFi upper view.
WiFi plan view with no metal objects around.
6.
CLEANING AND MAINTENANCE.
To ensure the correct operation of your boiler, the following Cleaning and maintenance operations are
necessary at the indicated frequency. The boiler must always be cold.
The deterioration of the boiler parts by a lack of cleaning involves the loss of the two-year warranty offered
by
ECOFOREST
(see warranty section).
It is highly recommended to exercise extreme caution when handling the interior of the boiler, due to the
possible existence of sharp edges or manufacturing burrs.
MAINTENANCE AT END OF SEASON OR AFTER AN ALARM MESSAGE (A001/A036/A037/A038)
.
This is necessary to ensure correct operation and maintain the stove’s life duration. When winter ends,
contact your provider (if he did not contact you) and meet to carry out this maintenance; the following shall be done
(the stove must always be disconnected from power):
Tools needed for cleaning and maintenance.
Drawing 19
Antenna.
Magnet connection base.
Screw driver / allen wrench. 3, 4 and 5mm
Screw driver / Torx wrench. T20
Spanner.
7, 10 and 15mm
Cable / cord / wire.
L > 800mm
Cleaning brush
Vacuum cleaning
Exchanger cleaner.