Manual Smart M160 / 1– UL- Engine
July 05
Ecofly GmbH
page 16
5.2. Checks after first 25hrs (in addition to 5.1.)
o
Check the entire power train for loose or missing nuts and screws. Replace
or tighten as necessary.
o
Check belt, belt tension, propeller drive and propeller bearings
o
Check air filter
o
Change oil, renew oil filter
o
Clean and renew fuel filter if necessary
5.3. Checks after 100hrs / 1 year (in addition to 5.1.)
o
Check the entire power train for loose or missing nuts and screws. Replace
or tighten as necessary
o
Coat engine bearing and other rubber components with a rubber-care fluid
o
Check belt, belt tension, propeller drive and propeller bearings
o
Check belt tension: must yield 5 -10mm in a cold engine when pressed
down with a finger; adjust if necessary
o
Change oil, renew oil filter
o
Renew fuel filter
o
Carefully check fuel system and lines for signs of brittleness; check all
guides, joints and connectors, renew ageing components where necessary
o
Clean air filter; renew if necessary
o
Check for dirt in the interstices between cooling fins o f the intercooler, clean
carefully
5.4. Checks after 300hrs / 3 years (in addition to 5.1. & 5.3.)
o
Renew spark plugs
o
Check compression
o
Renew coolant
o
Until and such time long-term tests are concluded, we strongly recommend
renewing the belt to be on the safe side.
Contact Ecofly GmbH.
o
after completion of long-term tests we expect a renewal of the belt every
600h (check in advance with Ecofly GmbH)
