ecodyst EcoChyll X1 Operating Manual Download Page 44 | Manualshive

Page: 44 / 69

ecodyst EcoChyll X1 Operating Manual Download Page 44

38

Accelerating the path to discovery

®

Technical Data

D. Stirrer Bearing

Chemglass Stirrer Bearing for 19mm polished stirrer shaft

•  Flake-Free
•  Chemically Resistant
•  Vacuum (~5 Torr) and Pressure (~5 PSI)
•  Polymer Blend Sleeve Provides Excellent Wear Resistance
•  For Use with Polished Glass or S.S. Stirrer Shafts

PTFE stirrer bearing provides a VACUUM TIGHT FLAKE-FREE SEAL. The stabilizer
series incorporates a PEEK

®

/PTFE stabilizing bushing that is molded to the lower

portion of the inner joint. The stabilizer greatly reduces stirrer shaft whip on
larger vessels. The bearing consists of a PTFE standard taper body, Glass filled
polypropylene screw cap, PEEK

®

Compression spring, PEEK

®

/PTFE sleeve and a

glass filled polypropylene loosening nut.

Ace Glass Stirrer Bearing for 19mm and 28mm polished stirring shaft

Self-aligning, lubricant free PTFE Trubore bearing or combination bearing / debris
trap. Use with19mm or 28mm polished glass stir shafts. Debris trap model
prevents bearing-wear particles from contaminating the evaporator vessel and has
a side port for clean-out, evacuating or purging. You can stir in either direction and
achieve vacuum down to 1mm Hg.

E. High Viscosity PTFE Agitators

High viscosity agitator, made entirely of PTFE and glass filled PTFE, provides
excellent stirring at the bottom of 12L through 200L evaporators, especially
when heavy slurries are being mixed. Agitator attaches to stir shaft by both a
compression fitting and a glass filled PTFE safety pin. PTFE, large-scale, multi-
paddle agitator design to accept pinned bottom valves.

F. Polished Glass Stirrer Shafts

Precision ground and polished stirrer shaft for use with EcoChyll Evaporator
Systems. 19mm OD for used with 12, 22, 50 and 72 liter and heavy duty 28mm
28mm OD for use with EcoChyll 100- and 200-liter systems.

G. O-Rings

Precision ground and polished stirrer shaft for use with EcoChyll Evaporator
Systems. 19mm OD for used with 12, 22, 50 and 72 liter and heavy duty 28mm
28mm OD for use with EcoChyll 100- and 200-liter systems.

«
...
42
43
44
45
46
...
»

Summary of Contents for EcoChyll X1






































































Reviews:

No comments